Video
Hỗ trợ khách hàng
Danh mục sản phẩm
Hỗ trợ kỹ thuật
Hotline hỗ trợ
0901578086
0901578086
Thống kê truy cập
- Online:
- Số lượt truy cập: 328652
Chi tiết sản phẩm
- Bo phát triển BIG8051
- Xuất xứ: Liên hệ
- Giá: Liên hệ
- Tình trạng: Liên hệ
- Lượt xem: 2872
What is BIG8051?
This board is a full-featured development environment for Silicon Labs C8051Fxxx microcontrollers. It has numerous on-board modules that help you to create your prototype device easily. It comes with C8051f040 microcontroller.
Programming and debugging
Board can be programmed using USB Debug Adapter - programmer.
Connectivity
All microcontroller pins are available through IDC10 port connectors, so you can easily attach other peripherals to your board.
Key features
Numerous peripherals
Board has a magnificent set of on-board modules: Serial Ethernet, Serial Flash, Serial RAM, Serial EEPROM, MMC/SD card, CAN, USB-UART, two RS-232 connectors, and more.
Fast MCU on-board
Provided MCU card contains powerful C8051F040 MCU. It is a 25 MIPS, 64 kB Flash, 100-Pin Mixed-Signal MCU, with 12-bit DAC, CAN, SM-Bus and other peripherals.
Highest quality components
We have put a lot of thought into the board design to make it beautiful and compact, and we used only the highest quality SMD components for production.
More than enough storage
We have equipped the board with four serial memory modules including EEPROM, RAM, Flash and MMC/SD mass storage, so you won’t lack memory any more.
What programmer/debugger should I use?
System comes with fast USB Debug Adapter - programmer from Silicon Laboratories.The USB Debug Adapter provides the interface between the PC’s USB port and the C8051Fxxx’s in-system debug/programming circuitry.
Drivers and Software
Drivers and Software for the programmer, as well as User Manualcan be found on folowing locations:
* mikroElektronika 8051 compilers currently do not support hardware debugging.
List of supported chips
BIG8051 development system fully supports following 8051 microcontrollers from Silicon Laboratories:
Where can I find Examples?
Examples available in the package
- UART1, UART2 and USB UART
- Wireless and Ethernet Example
- LCD, LED Blinking and Sound example
- Serial RAM, Flash and EEPROM example
- Using 1-wire Temperature Sensor
- Image and text display on Graphic LCD
- DAC, ADC and Comparator examples
mikroC
PRO for 8051Examples
mikroBasic
PRO for 8051Examples
mikroPascal
PRO for 8051Examples
All examples are written in our PRO compilers for 8051: mikroC, mikroBasic and mikroPascal.
What's on BIG8051?
Hover your cursor over the desired module hot spot 
to get more information
DAC Output
Convert digital signals to analog voltage levels using 12-bit MCP4921DAC chip with SPI interface. It has two separate DAC channels and is connected to output Screw Terminal.
How Do I Power This Board?
Using the on-board power supply unit is the most reliable way to power the board
You can power the board in two ways, depending on power consumption of used on-board or additional modules.
1. Powering the board using USB-UART connector
USB-UART connector can be used to provide the power to the board. You should be able to run all on-board modules, including GLCD display and Ethernet. You should know that you can draw maximum of 500mA from the PC USB port.
2. Powering the board via Power Supply Unit
This is the best and most reliable way to power the board. You can provide enough power to utilize all on-board modules and extra boards you need.
Package Details
The BIG8051 development system is packed in the protective box along with the relevant documentation and product CD. This box is very resistant to all kinds of damages and shocks. The package contains:
- Damage resistant protective box
- BIG8051 development system in antistatic bag
- USB Debug Adapter with USB cable
- User Manual and
Board Schematic - CD with documentation and code examples
Sản phẩm cùng loại
Đối tác toàn cầu
